The CAP-O-MAT is a mature multifunction system designed to meet the technical and commercial canmaking challenge of the future.
High level of process capability.
Wide variety of application.
Safety and operator protection.
All die-operating tools are designed with overload protection and as cartridge tools for quick and easy change over.
   
The pre-curl station can be equipped with rail pre-curling technology, which reduces
the tooling costs.
Alternativly the pre-curl station can be achieved in die pre-curling technology.
   
CAP-O-MAT integrated flexer tooling for better safety button peformance
A flexer pin is integrated in the second operation tool to flex the safety button during passage of the caps. This feature is helpful when small diameter caps with safety button are produced to get a softer and constant button performance.
CAP-O-MAT cap forming toolings (twist off) for 1st, 2nd and 3rd operation.
The pre-curl station prepares the cap for curling. The pre-curl geometry takes into account nosing and curl radius.
 
Alternativly the pre-curl station can be equipped with die pre-curling technology.
 
Rail pre-curling   Die pre-curling
 
   
The curling station prepares the cap for the lugging station. The curl geometry is determined by the lugging station.
   
Die curling    
   
The lugging station determines the appearance of the cap. The function and appearance of the lug have been developed with optimum geometry in mind.
   
Die lugging    
Technical Data