Integrated can turning station in the CAN-O-MAT
Extended process combinations with intergrated can turning.     Some forming processes can only be performed at one end of the can. In such cases the bodies must be turned so that the correct ends face the tools.     When parting with pre-flanging and die-necking are to be combined, every second body can be turned so that the pre-flange is opposite the end to be die-necked.     It is also possible to turn bodies necked at one end prior to seaming, so that either the necked or the unnecked end can be seamed without the need to changeover the preceding stations (necking, flanging).

Technical Data

CAN-O-MAT I   can  turning

	4 spindles	6 spindles	8 spindles
Body diameter	49 – 99 mm	49 – 83 mm	49 – 99 mm
Body height	70 – 180 mm	70 – 150 mm	70 – 125 mm
Sheet thickness	0,12– 0,25 mm	0,12– 0,25 mm	0,12– 0,25 mm
Max. capacity	400 cpm	600 cpm	800 cpm

 Technical Data:(all CAN-O-MAT processes)