Flawless flanges are the basis for flawless seams
Die flanging:
Process for die forming of flanges of XXL cans or of soft material bodies
Ideal for processing softer higher gauge SR material, such as frequently used for larger can diameters, in some cases processed by CAN-O-MAT II.
Die-flanging is the simplest and most robust method as far as machines and tools are concerned. The flange is formed simultaneously along the entire circumference by a die. Die-flanging exerts the highest stress on material and on the neck in axial direction.
Die-flanging is best suited to flange bodies made of thick, soft material and bodies with large diameters.
 
Information:  Press articles
  Smooth or stepped neck - a technological question ( pdf   )
Technical Data  
CAN-O-MAT I   die flanging
  4 spindles 6 spindles 8 spindles 12 spindles
 Body diameter 49 – 105 mm 49 – 83 mm 49 – 105 mm 49 – 73 mm
 Body height 35 – 190 mm 35 – 190 mm 35 – 190 mm 35 – 190 mm
 Sheet thickness 0,18– 0,25 mm 0,18– 0,25 mm 0,18– 0,25 mm 0,18– 0,25 mm
 Max. capacity 400 cpm 600 cpm 800 cpm 1200 cpm

CAN-O-MAT II   die flanging
  4 spindles
 small p.c.d.		 6 spindles
 small p.c.d.
 Body diameter 73 – 153 mm 73 – 127 mm
 Body height 70 – 250 mm 70 – 250 mm
 Sheet thickness 0,20– 0,30 mm 0,20– 0,30 mm
 Max. capacity 300 cpm 450 cpm

 Technical Data:(all CAN-O-MAT processes)